Mixer 35

Mixer 35

Description

The Maxi Mixer 35 (commonly referred to as the Mixer 35 or Maxi Mixer) is a Swedish performance cruiser-racer designed by Pelle Petterson (Olympic medalist and son of legendary designer Arvid Petterson) and built by Maxi Yachts (Sweden) from 1981 to 1985, with approximately 200 hulls produced in fiberglass. It features a fractional (7/8) sloop rig for efficient handling and good light-air performance, a fin keel with spade rudder for responsive agility, vacuum-bagged construction for strength and lightness, and a comfortable interior (sleeps 6 with V-berth + saloon settees + aft cabin, galley, heads) optimized for family cruising or club racing—celebrated for its blend of speed, stability, and beauty, with a reputation as a "classic Swedish flyer" that still performs well today.

Construction Details

Designer Pelle Petterson
Builder Maxi Yachts (Pelle Petterson AB)
Length 34.600 ft
LOA 34.600 ft
LWL 27.890 ft
Beam 10.660 ft
Displacement 9921 lb
Ballast 3968 lb
Max Draft 6.070 ft
Year Built 1981
Request A Sail Quote

The standard boat dimensions

i 37.67 ft
j 12.33 ft
p 42.67 ft
e 14.42 ft
p2 -
e2 -
i2 -
j2 -

Sails

Mixer 35 - MAINSAIL

Luff * 42.67 ft - (13006 mm)
Foot * 14.42 ft - (4395 mm)
Leech * 44.4 ft - (13533 mm)
Tack Angle * 87.99 °
Diagonal * 44.56 ft - (13582 mm)
Head (inches) * 6 in - (152 mm)
Area 307.32 ft²
Edit in Calculator

Mixer 35 - JIBSAIL

Luff * 31.71 ft - (9665 mm)
Foot * 16.39 ft - (4996 mm)
Leech * 27.43 ft - (8361 mm)
Percentage LP * 115 %
Length Perpendicular * 14.18 ft - (4322 mm)
Deck Angle * 12 °
Area 224.76 ft²
Edit in Calculator

Mixer 35 - GENOA

Luff * 37.65 ft - (11476 mm)
Foot * 19.97 ft - (6087 mm)
Leech * 35.35 ft - (10775 mm)
Percentage LP * 150 %
Length Perpendicular * 18.5 ft - (5639 mm)
Deck Angle * 4 °
Area 348.22 ft²
Edit in Calculator

Mixer 35 - SPINNAKER

Stays * 37.65 ft - (11476 mm)
MidGirth * 22.19 ft - (6764 mm)
Foot * 22.19 ft - (6764 mm)
Perc LP * 180 %
Area 710.14 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

Portable hotknife

© 2025 Good Old Boat, Inc. All rights reserved