MOORE 24
Description
The Moore 24 is an ultra light designed in 1974. Her displacement to ballast ration of nearly 50% helps her to stay on her feet even with a beam of only 7'2". Built to race it has minimal accommodations below.
Construction Details
| Designer | George Olson/Ron Moore |
|---|---|
| Builder | Moore Custom Yachts |
| Length | 24.000 ft |
| LOA | 23.750 ft |
| LWL | 21.750 ft |
| Beam | 7.170 ft |
| Displacement | 2050 lb |
| Ballast | 1000 lb |
| Max Draft | 4.080 ft |
| Year Built | 1974 |
The standard boat dimensions
| i | 26.25 ft |
|---|---|
| j | 9.75 ft |
| p | 25 ft |
| e | 9.50 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 26.25 ft | 9.75 ft | 25 ft | 9.50 ft | - | - | - | - |
Documents
Sails
MOORE 24 - MAINSAIL
| Luff | * 25 ft - (7620 mm) |
|---|---|
| Foot | * 9.5 ft - (2896 mm) |
| Leech | * 26.29 ft - (8013 mm) |
| Tack Angle | * 88.43 ° |
| Diagonal | 26.5 ft - (8077 mm) |
| Head (inches) | * 4.5 in - (114 mm) |
| Area | * 122.81 ft² |
| Edit in Calculator |
MOORE 24 - JIBSAIL
| Luff | 26.6 ft - (8108 mm) |
|---|---|
| Foot | 9.75 ft - (2972 mm) |
| Leech | 24.5 ft - (7468 mm) |
| Percentage LP | * 92.1 % |
| Length Perpendicular | * 8.98 ft - (2737 mm) |
| Deck Angle | * 2.59 ° |
| Area | * 119.4 ft² |
| Edit in Calculator |
MOORE 24 - JIBSAIL
| Luff | 26.67 ft - (8129 mm) |
|---|---|
| Foot | 10.75 ft - (3277 mm) |
| Leech | 24.25 ft - (7391 mm) |
| Percentage LP | * 100.21 % |
| Length Perpendicular | * 9.77 ft - (2978 mm) |
| Deck Angle | * 4.23 ° |
| Area | * 130.33 ft² |
| Edit in Calculator |
MOORE 24 - GENOA
| Luff | * 26.6 ft - (8108 mm) |
|---|---|
| Foot | * 16.05 ft - (4892 mm) |
| Leech | * 24.76 ft - (7547 mm) |
| Percentage LP | * 149.95 % |
| Length Perpendicular | * 14.62 ft - (4456 mm) |
| Deck Angle | * 3.98 ° |
| Area | * 194.47 ft² |
| Edit in Calculator |
MOORE 24 - SPINNAKER
| Stays | * 26.6 ft - (8108 mm) |
|---|---|
| MidGirth | * 17.55 ft - (5349 mm) |
| Foot | * 17.55 ft - (5349 mm) |
| Perc LP | * 180 % |
| Area | * 397 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
