SWAN 47-2 S&S CB (NYYC 48)

SWAN 47-2 S&S CB (NYYC 48)

Description

The Swan 47-2 S&S CB (NYYC 48) is a centerboard-equipped variant of the classic Swan 47 offshore cruiser-racer, designed by Sparkman & Stephens (S&S design #2201) and built by Oy Nautor AB in Finland. It was introduced in 1976 as a response to requests (including from the New York Yacht Club) for a shallower-draft version suitable for coastal and some offshore sailing while retaining strong performance. Of the total ~70 Swan 47 hulls built between 1975 and 1984, only 10 were completed as this centerboard (CB) model, often referred to as the NYYC 48 (with hull numbers starting around 60+). It features a masthead sloop rig, high-quality fiberglass construction with teak decks and interior joinery typical of early Nautor Swans, and a practical layout for cruising with racing capability.

Construction Details

Designer Sparkman and Stephens
Builder Nautor Swan (Finland)
Length 47.830 ft
LOA 47.830 ft
LWL 36.240 ft
Beam 13.760 ft
Displacement 34400 lb
Ballast 17500 lb
Max Draft 8.000 ft
Min Draft 5.830 ft
Year Built 1976
Request A Sail Quote

The standard boat dimensions

i 60 ft
j 19.80 ft
p 53.70 ft
e 18 ft
p2 -
e2 -
i2 -
j2 -

Sails

SWAN 47-2 S&S CB (NYYC 48) - MAINSAIL

Luff * 53.7 ft - (16368 mm)
Foot * 18 ft - (5486 mm)
Leech * 55.88 ft - (17032 mm)
Tack Angle * 88.01 °
Diagonal * 56.04 ft - (17081 mm)
Head (inches) * 6 in - (152 mm)
Area * 482.83 ft²
Edit in Calculator

SWAN 47-2 S&S CB (NYYC 48) - JIBSAIL

Luff * 50.55 ft - (15408 mm)
Foot * 26.36 ft - (8035 mm)
Leech * 43.67 ft - (13311 mm)
Percentage LP * 115 %
Length Perpendicular * 22.77 ft - (6940 mm)
Deck Angle * 12 °
Area * 575.45 ft²
Edit in Calculator

SWAN 47-2 S&S CB (NYYC 48) - GENOA

Luff * 60.02 ft - (18294 mm)
Foot * 32.09 ft - (9781 mm)
Leech * 56.33 ft - (17169 mm)
Percentage LP * 150 %
Length Perpendicular * 29.7 ft - (9053 mm)
Deck Angle * 4 °
Area * 891.26 ft²
Edit in Calculator

SWAN 47-2 S&S CB (NYYC 48) - SPINNAKER

Stays * 60.02 ft - (18294 mm)
MidGirth * 35.64 ft - (10863 mm)
Foot * 35.64 ft - (10863 mm)
Perc LP * 180 %
Area * 1818.25 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

sailboat bimini

© 2025 Good Old Boat, Inc. All rights reserved