TMI T-37
Description
The TMI T-37 (also known as the TMI 37) is a 37-foot fiberglass cruising/racer sloop designed by Jim Taylor for Texas Marine International (TMI) around 1980–1981. TMI, a short-lived Texas-based company that also continued several Chrysler Marine molds, commissioned this model as a larger performance-oriented cruiser. Production was extremely limited (likely only a handful of boats before TMI ceased operations), making it one of the rarer entries in the TMI lineup. The boat features a modern fin keel with spade rudder, generous beam for stability and interior volume, and a masthead sloop rig optimized for all-around coastal and light offshore sailing with good light-air performance.
Construction Details
| Designer | Jim Taylor |
|---|---|
| Builder | Texas Marine International (TMI) |
| Length | 37.000 ft |
| LOA | 37.000 ft |
The standard boat dimensions
| i | 49.92 ft |
|---|---|
| j | 15.58 ft |
| p | 44.50 ft |
| e | 13.92 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 49.92 ft | 15.58 ft | 44.50 ft | 13.92 ft | - | - | - | - |
Sails
TMI T-37 - MAINSAIL
| Luff | * 44.5 ft - (13564 mm) |
|---|---|
| Foot | * 13.92 ft - (4243 mm) |
| Leech | * 46.01 ft - (14024 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 46.16 ft - (14070 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | 309.39 ft² |
| Edit in Calculator |
TMI T-37 - JIBSAIL
| Luff | * 41.84 ft - (12753 mm) |
|---|---|
| Foot | * 20.55 ft - (6264 mm) |
| Leech | * 36.48 ft - (11119 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 17.92 ft - (5462 mm) |
| Deck Angle | * 12 ° |
| Area | 374.83 ft² |
| Edit in Calculator |
TMI T-37 - GENOA
| Luff | * 49.68 ft - (15142 mm) |
|---|---|
| Foot | * 25.09 ft - (7647 mm) |
| Leech | * 46.8 ft - (14265 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 23.37 ft - (7123 mm) |
| Deck Angle | * 4 ° |
| Area | 580.49 ft² |
| Edit in Calculator |
TMI T-37 - SPINNAKER
| Stays | * 49.68 ft - (15142 mm) |
|---|---|
| MidGirth | * 28.04 ft - (8547 mm) |
| Foot | * 28.04 ft - (8547 mm) |
| Perc LP | * 180 % |
| Area | 1184.07 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
