Toon 2
Description
The Toon 2 is a 15.5-foot (LOA approximately 15.5–16 ft) plywood stitch-and-glue cuddy-cabin daysailer designed by Jim Michalak. It is a plans-built boat intended for amateur builders, with a simple, stable hull form featuring a small, enclosed cuddy for shelter/storage and an open cockpit. No factory production occurred; it is a low-volume homebuilt design popular among the Michalak/duckworks community for Texas 200-type events, messabouts, and protected-water sailing. The boat is lightweight (around 350 lb), easy to trailer or car-top, and known for surprising agility and a good turn of speed despite its "tubby" appearance. Owners report it balances well once the sail is trimmed and handles light to moderate winds comfortably.
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| - | - | - | - | - | - | - | - |
Sails
Toon 2 - STANDING LUGSAIL
| Luff | 5.25 ft - (1600 mm) |
|---|---|
| Foot | 11.33 ft - (3453 mm) |
| Leech | 14.92 ft - (4548 mm) |
| Tack Angle | * 78.52 ° |
| Diag (clew/throat) | 11.5 ft - (3505 mm) |
| Head | 11 ft - (3353 mm) |
| Area | * 91.93 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
