TRADEWINDS 30 SLOOP
Description
The Tradewinds 30 (also known as the Tradewind 30 Sloop) is a 30-foot fiberglass masthead sloop with designer: Unknown in most databases. It was built by Islander / Tradewind Yachts (a California-based builder associated with Islander Yachts) in the late 1960s to early 1970s. Production numbers are low and not precisely documented, consistent with many semi-custom or short-run models from that era.
Construction Details
| Designer | Unknown |
|---|---|
| Builder | Islander / Tradewind Yachts |
| Length | 30.000 ft |
| LOA | 30.000 ft |
The standard boat dimensions
| i | 31.50 ft |
|---|---|
| j | 11 ft |
| p | 26.50 ft |
| e | 15 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 31.50 ft | 11 ft | 26.50 ft | 15 ft | - | - | - | - |
Sails
TRADEWINDS 30 SLOOP - MAINSAIL
| Luff | * 26.5 ft - (8077 mm) |
|---|---|
| Foot | * 15 ft - (4572 mm) |
| Leech | * 29.74 ft - (9065 mm) |
| Tack Angle | * 87.99 ° |
| Diagonal | * 29.99 ft - (9141 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | 198.46 ft² |
| Edit in Calculator |
TRADEWINDS 30 SLOOP - JIBSAIL
| Luff | * 26.69 ft - (8135 mm) |
|---|---|
| Foot | * 14.8 ft - (4511 mm) |
| Leech | * 22.84 ft - (6962 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 12.65 ft - (3856 mm) |
| Deck Angle | * 12 ° |
| Area | 168.87 ft² |
| Edit in Calculator |
TRADEWINDS 30 SLOOP - GENOA
| Luff | * 31.7 ft - (9662 mm) |
|---|---|
| Foot | * 17.96 ft - (5474 mm) |
| Leech | * 29.63 ft - (9031 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 16.5 ft - (5029 mm) |
| Deck Angle | * 4 ° |
| Area | 261.54 ft² |
| Edit in Calculator |
TRADEWINDS 30 SLOOP - SPINNAKER
| Stays | * 31.7 ft - (9662 mm) |
|---|---|
| MidGirth | * 19.8 ft - (6035 mm) |
| Foot | * 19.8 ft - (6035 mm) |
| Perc LP | * 180 % |
| Area | 533.51 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
