Tripp Racer/Cruiser 36
Description
The Tripp 36 (also known as the Tripp Racer/Cruiser 36) is a 1991-era performance sailboat designed by William H. "Bill" Tripp III and built primarily by Carroll Marine in Rhode Island. It's a fiberglass composite racer/cruiser that blends decent speed and handling with basic cruising amenities.
Construction Details
| Designer | William H. Tripp III |
|---|---|
| Builder | Carroll Marine |
| Length | 36.000 ft |
| LOA | 36.000 ft |
| LWL | 29.900 ft |
| Beam | 11.330 ft |
| Displacement | 9685 lb |
| Ballast | 4500 lb |
| Max Draft | 6.940 ft |
| Year Built | 1991 |
The standard boat dimensions
| i | 45.24 ft |
|---|---|
| j | 12.96 ft |
| p | 46.98 ft |
| e | 17 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 45.24 ft | 12.96 ft | 46.98 ft | 17 ft | - | - | - | - |
Sails
Tripp Racer/Cruiser 36 - MAINSAIL
| Luff | * 46.98 ft - (14320 mm) |
|---|---|
| Foot | * 17 ft - (5182 mm) |
| Leech | * 49.23 ft - (15005 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 49.4 ft - (15057 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | 398.92 ft² |
| Edit in Calculator |
Tripp Racer/Cruiser 36 - JIBSAIL
| Luff | * 37.65 ft - (11476 mm) |
|---|---|
| Foot | * 16.88 ft - (5145 mm) |
| Leech | * 33.26 ft - (10138 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 14.9 ft - (4542 mm) |
| Deck Angle | * 12 ° |
| Area | 280.64 ft² |
| Edit in Calculator |
Tripp Racer/Cruiser 36 - GENOA
| Luff | * 44.71 ft - (13628 mm) |
|---|---|
| Foot | * 20.69 ft - (6306 mm) |
| Leech | * 42.36 ft - (12911 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 19.44 ft - (5925 mm) |
| Deck Angle | * 4 ° |
| Area | 434.64 ft² |
| Edit in Calculator |
Tripp Racer/Cruiser 36 - SPINNAKER
| Stays | * 44.71 ft - (13628 mm) |
|---|---|
| MidGirth | * 23.33 ft - (7111 mm) |
| Foot | * 23.33 ft - (7111 mm) |
| Perc LP | * 180 % |
| Area | 886.62 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
