Tripp 37 (Holby Tripp 37)
Description
The Tripp 37 (also known as the Holby Tripp 37) is a performance racer/cruiser sailboat designed by William H. "Bill" Tripp III. It was built by Holby Marine in Bristol, Rhode Island, primarily between 1984 and 1989. Unlike the later Tripp 36 (built by Carroll Marine), this is an earlier design with a more cruiser-friendly layout while retaining solid racing potential.
Construction Details
| Designer | William H. Tripp III |
|---|---|
| Builder | Holby Marine Co. |
| Length | 36.930 ft |
| LOA | 36.930 ft |
| LWL | 29.830 ft |
| Beam | 10.830 ft |
| Displacement | 11300 lb |
| Ballast | 5250 lb |
| Max Draft | 6.830 ft |
| Year Built | 1984 |
The standard boat dimensions
| i | 49.75 ft |
|---|---|
| j | 14.50 ft |
| p | 43.25 ft |
| e | 13.50 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 49.75 ft | 14.50 ft | 43.25 ft | 13.50 ft | - | - | - | - |
Sails
Tripp 37 (Holby Tripp 37) - MAINSAIL
| Luff | * 43.25 ft - (13183 mm) |
|---|---|
| Foot | * 13.5 ft - (4115 mm) |
| Leech | * 44.71 ft - (13628 mm) |
| Tack Angle | * 88.02 ° |
| Diagonal | * 44.86 ft - (13673 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | 291.63 ft² |
| Edit in Calculator |
Tripp 37 (Holby Tripp 37) - JIBSAIL
| Luff | * 41.46 ft - (12637 mm) |
|---|---|
| Foot | * 18.93 ft - (5770 mm) |
| Leech | * 36.53 ft - (11134 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 16.68 ft - (5084 mm) |
| Deck Angle | * 12 ° |
| Area | 345.69 ft² |
| Edit in Calculator |
Tripp 37 (Holby Tripp 37) - GENOA
| Luff | * 49.23 ft - (15005 mm) |
|---|---|
| Foot | * 23.18 ft - (7065 mm) |
| Leech | * 46.59 ft - (14201 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 21.75 ft - (6629 mm) |
| Deck Angle | * 4 ° |
| Area | 535.28 ft² |
| Edit in Calculator |
Tripp 37 (Holby Tripp 37) - SPINNAKER
| Stays | * 49.23 ft - (15005 mm) |
|---|---|
| MidGirth | * 26.1 ft - (7955 mm) |
| Foot | * 26.1 ft - (7955 mm) |
| Perc LP | * 180 % |
| Area | 1092.17 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
