Victoria 34 Sloop

Victoria 34 Sloop

Description

The Victoria 34 Sloop is a traditional-styled, high-quality cruising yacht designed by American naval architect Chuck Paine (C.W. Paine Yacht Design). It was built by Victoria Marine Ltd. in Warsash, Southampton, UK (with hulls laid up by Northshore Yachts), from 1985 until around 2000 (molds later sold). Production numbers were modest (likely a few dozen hulls), as the boat was positioned as a semi-custom or higher-end model rather than a mass-produced one. The design features a moderately long, shallow fin keel with a strong skeg-hung rudder, solid GRP hull, and balsa-cored deck, built to high standards (often Lloyd’s Register spec). It has a conservative, timeless appearance that looks like a smaller version of Paine’s larger Bowman designs, emphasizing seaworthiness, comfortable motion, and ease of handling for coastal or short offshore cruising.

Construction Details

Designer C. W. (Chuck) Paine
Builder Victoria Marine Ltd. (UK)
Length 34.250 ft
LOA 34.250 ft
LWL 28.330 ft
Beam 10.670 ft
Displacement 12720 lb
Ballast 5525 lb
Max Draft 4.830 ft
Year Built 1985
Request A Sail Quote

The standard boat dimensions

i 44.88 ft
j 13.78 ft
p 38.81 ft
e 11.48 ft
p2 -
e2 -
i2 -
j2 -

Sails

Victoria 34 Sloop - MAINSAIL

Luff * 38.81 ft - (11829 mm)
Foot * 11.48 ft - (3499 mm)
Leech * 39.96 ft - (12180 mm)
Tack Angle * 87.97 °
Diagonal * 40.08 ft - (12216 mm)
Head (inches) * 5.25 in - (133 mm)
Area 222.53 ft²
Edit in Calculator

Victoria 34 Sloop - JIBSAIL

Luff * 37.56 ft - (11448 mm)
Foot * 18.13 ft - (5526 mm)
Leech * 32.83 ft - (10007 mm)
Percentage LP * 115 %
Length Perpendicular * 15.85 ft - (4831 mm)
Deck Angle * 12 °
Area 297.6 ft²
Edit in Calculator

Victoria 34 Sloop - GENOA

Luff * 44.6 ft - (13594 mm)
Foot * 22.15 ft - (6751 mm)
Leech * 42.07 ft - (12823 mm)
Percentage LP * 150 %
Length Perpendicular * 20.67 ft - (6300 mm)
Deck Angle * 4 °
Area 460.96 ft²
Edit in Calculator

Victoria 34 Sloop - SPINNAKER

Stays * 44.6 ft - (13594 mm)
MidGirth * 24.8 ft - (7559 mm)
Foot * 24.8 ft - (7559 mm)
Perc LP * 180 %
Area 940.17 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

sailboat bimini

© 2025 Good Old Boat, Inc. All rights reserved