Westsail 36 Ketch

Westsail 36 Ketch

Description

The Westsail 36 Ketch is a rare American fiberglass bluewater cruising ketch derived from the successful Westsail 32/36 family lineage, featuring heavy-displacement, full-keel construction with solid hand-laid fiberglass hull, encapsulated ballast, skeg-hung rudder, and a traditional ketch rig for versatile sail handling in heavy weather. It was built by Westsail Corporation (USA) as part of their "overbuilt" offshore cruiser series, emphasizing strength, sea-kindliness, and liveaboard comfort with a practical interior layout offering good headroom and accommodations for extended passage making. Production of the Westsail 36 series (including sloop and ketch variants) was limited and occurred primarily in the mid-to-late 1970s during the company's active years before its eventual financial difficulties; exact numbers for the ketch specifically are very low (a small fraction of the overall 36-foot models produced), making these boats uncommon today.

Construction Details

Designer In House Design
Builder Westsail Corporation (USA)
Length 36.000 ft
LOA 36.000 ft
Beam 11.000 ft
Max Draft 5.000 ft
Year Built 1975
Request A Sail Quote

The standard boat dimensions

i 42.70 ft
j 14 ft
p 36.75 ft
e 12.50 ft
p2 19.75 ft
e2 7 ft
i2 -
j2 -

Sails

Westsail 36 Ketch - MAINSAIL

Luff 36.75 ft - (11201 mm)
Foot 12.42 ft - (3786 mm)
Leech * 38.24 ft - (11656 mm)
Tack Angle * 88 °
Diagonal * 38.38 ft - (11698 mm)
Head (inches) * 5.25 in - (133 mm)
Area 227.97 ft²
Edit in Calculator

Westsail 36 Ketch - JIBSAIL

Luff * 35.95 ft - (10958 mm)
Foot * 18.62 ft - (5675 mm)
Leech * 31.09 ft - (9476 mm)
Percentage LP * 115 %
Length Perpendicular * 16.1 ft - (4907 mm)
Deck Angle * 12 °
Area 289.4 ft²
Edit in Calculator

Westsail 36 Ketch - GENOA

Luff 32.25 ft - (9830 mm)
Foot 17 ft - (5182 mm)
Leech 25.83 ft - (7873 mm)
Length Perpendicular 13.55 ft - (4130 mm)
Area 218.55 ft²
Edit in Calculator

Westsail 36 Ketch - MIZZEN

Luff * 19.75 ft - (6020 mm)
Foot * 7 ft - (2134 mm)
Leech-AftHdBd * 20.63 ft - (6288 mm)
Tack Ang * 88.07 °
Diag (clew/head) * 20.73 ft - (6319 mm)
Head (inches) * 3.5 in - (89 mm)
Area (no Roach) 69.04 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

sailboat bimini

© 2025 Good Old Boat, Inc. All rights reserved